Thanks for choosing our WLD190SP series swimming pool pump controller, we
will provide you with a warm and attentive service.
WLD190SP series product is a integrated single-pump economical intelligent
pump controller which is specifically designed for swimming pool pump. It is
suitable for general household swimming pool circulating water pump, to realize
water pump speed control
PRODUCT INTRODUCTION
Features
V/F Control
Professional design based on the swimming pool water supply users' needs,
simplicity of operation
Preset 3-section of speeds, user can modify the speed as per requirements.
| MODE |
SPEED RANGE(RPM) |
DEFAULT SPEED(RPM) |
| WINTER |
1200-1650 |
1400 |
| SAVING |
1700-2400 |
2000 |
| BACK WASH |
2450-2900 |
2900 |
Temperature monitoring set as reduction of speed: When the IPM module
temperature reach 75ºC, it will turn into The High Temperature Warning State;
When the IPM module temperature drops to 60 ºC , The High Temperature
Warning State will be cleared. During The High Temperature Warning State,
controller operates as per a certain regulation with reduction of speed
No matter under which state, when the IPM module temperature reach 40ºC, it
will start the external cooling fan; when the IPM module temperature decrease to
35ºC, it will stop the external cooling fan
Multiple fault protection function: Over-current, over-voltage, under-voltage,
over-heat, phase-failure, over-load etc.
ENVIRONMENTAL REQUIREMENT
1. Environment temperature range: -10ºC~+40ºC. Controller will be derated if
ambient temperature exceeds 40ºC.
2. Humidity: (45~90)% RH, no condensation.
3. Prevent oil mist, salt erosion, corrosive gas, etc.
4. Keep away from radiation source and inflammable.
5. Prevent violent vibration or sudden impact.
6. Lower than 1000m installation altitude, it will be derated when the altitude is
higher than 1000m.
Noted that we can provide single phase 220V input/single phase 220V output model
){kind=link}