2022 Bedford New Style Waterproof (IP54) Pump VFD

• Customization: Available
• Application: High-performance Transducer
• Output Type: Triple
• Model NO.: W713B
• Principle of Work: PLC Control
• Switch Mode: PWM Control
• Main Circuit Type: Voltage
• Voltage of Power Supply: Low Voltage Variable-Frequency Drive
• Link of Transformation: AC-DC-AC Variable-Frequency Drive
• Nature of DC Power: Voltage Variable-Frequency Drive
• Function: Pump Special
• Brand: Bedford
• Output Power: 0.75~18.5kw
• Input Voltage: 1pH 220V or 3pH 380V
• Output Voltage: 0~220/380V Three Phase
• Type: AC-DC-AC Inverter
• Output Frequency: 0~600Hz
• Protection Rate: IP54
• Color: Black
• Features: Built-in Pid Can Realize None Load Shut Down
• Communication: Mob Bus RTU Communication Protocol
• Control Mode: Constant Pressure, Constant Differential Pressure
• Transport Package: CTN or Wooden Cases
• Specification: 3PH 220V or 3PH 380V
• Trademark: BEDFORD
• Origin: Guangzhou, China
• Production Capacity: 9000 Piece/Pieces / Month

Product Description

2022 BEDFORD New style Waterproof (IP54) Pump VFD

New W713B series intelligent constant pressure water supply controller
is suitable for full-automatic operation, with characteristics of high quality, multi-functional, low noise and strong commonality etc.
There are no special demands for peripherals, it mainly use normal components, for example: Water detection use transducer, transmitter (include water level transmitter, temperature transmitter, etc. ) or inductive remote transmission pressure gauge, with output of 4~20mA, 0~5VDC and 0~10 VDC standard signal.


Power range:

Single phase 220V input, 3 phase 220V output: 1HP-3HP(0.75KW-2.2KW)
Three phase 220V input, 3 phase 220V output: 1HP-10HP(0.75KW-7.5KW)
Three phase 380V input, 3 phase 380V output: 1HP-25HP(0.75KW-18.5KW)



Function characteristics:

Features:

Category	Content	W713B
Photo for Reference
Pressure Optimization	Pressure Stability	The pressure change curve is more stable, and the frequency change is smaller after stabilization
	Alternate Transition	Yes, the transition tends to be smooth and excessive (the transitional pump looks at the difference between the given pressure L and the feedback pressure P to adjust the frequency, and it will stop when L-P<0.2bar. If the water consumption suddenly increases at this time, the L-P>0.2 bar, alternating water pumps will speed up the frequency regulation pressure, when L-P=0.2bar, slowly adjust the frequency for a smooth transition)
Mode	Control Mode	Constant pressure, Constant differential pressur,Constant temperature, Constant differential temperature
	Linkage Mode	Synchronize, Master-slave, Big-small pump, One duty one standby, One VFD drive two pumps
	Manual/ auto Mode Switching	Can be switched by button or terminal. Button switch: press the   and  buttons at the same time for manual/auto switch (also switchable in case of failure) Terminal switching: S2-COM off: auto control  S2-COM on:manual control  In manual control, the manual frequency can be adjusted through the up and down buttons, and the influence of pressure is shielded, which is more comprehensive
	Alternating Mode	Alternate by time (Alternate when time comes to sleep) Alternate sleep and wake up, and alternate by time
	Upper and Lower Pool Control	Available (S1~S4 terminal control)
	Independent Start and Stop Control	Available, start and stop is controlled by the inverter (can be controlled by panel or S4 terminal)
Outward Expansion	General Frequency Converter (such as PLC)	Compatible with this mode
	Connect the Touch Screen of BEDFORD	Available
	Third-party Devices	Direct connection (Mob Bus RTU communication protocol)
External Interface Features	Analog Input
	Digital Input	4-way 1. Electronic contact gauge control 2. Manual/auto control 3. Terminal run/stop 4. Water level control (low water level) 5. Upper and lower pool control 6. One driving two fault input
	Digital Output	way relay output selection 0: Error or external fault; 1: Forward running (including zero-speed running); 2: Upper limit frequency reaching; 3: Stop status; 4: Lower limit frequency reaching; 5: The frequency is not equal to zero; 6: Actual pressure on the outlet side reaching high water pressure alarm value; 7: Actual pressure on the outlet side decreases to low water pressure alarm value; 8: Actual temperature on the outlet side reaching high water temperature alarm value; 9: Actual temperature on the outlet side decreases to low water temperature alarm value; 10: One driving two RO function, for variable frequency pump control 11: One driving two RO function, for power frequency pump control
Button	Keyboard Touch		Touch the button: feel better
Other Features	Multi-linkage		Max realize up to 5 pumps linkage water supply operation
	Sleep Function	Unmanned water automatic sleep, better energy saving effect
	Freeze-proofing Function	Suitable for low temperature frost climate
	Anti-clogging Function	Prevent and remove pipe blockage
	Power On Restart	Automatic continuous water supply, power interruption during operation, and automatic restart when there is a call
	Master Fault Shift Automatically	Realize unmanned monitoring, host failure, uninterrupted water supply
	Day-Part Function	1. 3 independent day-part control, up to 7 day-part achieved when define separated; 2. One Duty One Standby Day-part Function: 3 independent day-part time section contro.
	Multiple Water Supply Failure Alarm Functions	High water pressure, low water pressure, low water level, open sensor and other fault alarms
	Multiple Fault Protection Functions	Overcurrent, overvoltage, under voltage, phase loss, overload and other protection functions

Obtained Certificates: